Coastal Timbers, Inc. stocks a wide variety of material with sizes shown below. We specialize in pressure treated Southern Yellow Pine, untreated Douglas Fir and untreated Rough Oak. We are able to special order just about any size or treatment, if available. We are also able to special order specific types of lumber (ex. Tongue & Groove, Dog Ear, V-Groove, etc.) The materials listed below are our most commonly stocked items. We also can precision end trim and size all four sides to exact dimensions.
#1 CA Treated Southern Yellow Pine
2” X 4” 12’, 16’ & 20’
2” X 6” 12’, 16’ & 20’
4” X 4” 12’, 16’ & 20’
12” Butt CCA Treated Southern Yellow Pine Piling, .80 Treatment
20’, 25’, 30’, 35’, 40’ 50’ 60’
CCA Treated Southern Yellow Pine Posts, .60 Treatment
4” x 6.5”
6” x 8’
CCA Treated Southern Yellow Pine Class 7 Posts, .60 Treatment
20’, 25’ 30’
CCA Treated Southern Yellow Pine Lumber, .60 Treatment
12” x 12” 12’, 16’, 20’, 24’
10” x 10” 12’, 16’, 20’
8” x 8” 12’, 16’, 20’
6” x 6” 12’, 16’, 20’
4” x 8” 12’, 16’, 20’
4” x 12” 12’, 16’, 20’, 24’
3” x 8” 12’, 16’, 20’, 24’
3” x 12” 12’, 16’, 20’, 24’
2” x 8” 12’, 16’, 20’
2” x 10” 12’, 16’, 20’
2” x 12” 12’, 16’, 20’, 24’
*2” x 8” up to 2” x 12” is S4S #1 Grade, KDAT
*3” x 12” up to 12” x 12” is #2 & Better, S1S1E
Hot Dipped Galvanized Hardware
3d to 60d Galvanized Common Nails
3/8” x 8”, 10”, 12” Galvanized Spikes
1/2”, 5/8”, 3/4″ Galvanized Flat Washers
1/2″, 5/8”, 3/4″ Galvanized Ogee Washers
1/2″, 5/8”, 3/4″ Galvanized Machine Bolts
1/2″, 5/8”, 3/4″ Galvanized Drift Pins
Micro-Laminated Plank Scaffold Boards (OSHA approved)
1 ¾” x 11 ¼” x 12’, 14’, 16’ & 20’
Untreated Rough Oak, Square Edge & Sound
12” x 12” 12’, 16’, 20’
6” x 8” 12’, 16’
4” x 4” 8’ 6”
3” x 12” 10’, 12’, 16’ 20’
2” x 4” 8’, 10’, 16’ Stripping
(Stripping are bundles of 100 pcs)
Untreated Rough Douglas Fir, #1 & Better
12” x 12” 12’, 14’, 16’, 18’, 20’, 24’, 26’, 32’
2” x 12” 10’, 12’, 14’, 16’, 18’, 20’, 22’, 24’
Rough Cypress
12” x 12”
10” x 10”
8” x 8”
1” x 8”
